Heat Exchanger Gaskets

When it comes to understanding the design and construction of the heat exchangers, you do need to extensively and quite vigorously understand the use and purpose of the Heat Exchanger Gaskets. Without the knowledge and understanding of these, you can quite not fully understand the design and also the purpose of the heat exchangers. In this article we will focus on understanding what a gasket really is and how it actually helps in the heat exchanger facilities and equipment. So let's start our understanding of the Heat Exchanger Gaskets.

In essence, the gasket can be defined as a mechanical seal. This mechanical seal is used primarily for the purpose of filling the spaces between tween two or more than that amount of mating surfaces. This is done most reasonably to prevent any sort of leakages whatsoever, to seep in or out of the objects that are joined while it is under any compression. It should also be understood here that the Heat Exchanger Gaskets allow the rather less than perfect mating surfaces on the machine parts, so that they can fill in all of the irregularities that may arise.

The Heat Exchanger Gaskets are usually made out of cutting the materials of sheet. These different materials used are gasket paper, silicone, cork, neoprene, fiberglass, plastic polymer (Polychlorotrifluroethylene), rubber, metal, felt, nitrile rubber or even Polytetrafluroethylene (also known as Teflon or PTFE). This clearly states that there are scores of options to choose from and hence the companies manufacturing the Heat Exchanger Gaskets usually use any of these or even combinations of them, while they are all suitable in their own ways and for different purposes.

Asbestos is also usually used in the Heat Exchanger Gaskets. This is even more common if these heat exchangers are used for the systems of higher pressure steam. But having said this, it should also be noted that asbestos does have its drawbacks and risks to health, hence is not that commonly used if preventable, as to support practicality.

Whenever companies decide on making the Heat Exchanger Gaskets, they prefer making those that are made of such a material that can be deformed to some extent, so that they tightly and completely fill in the spaces. It is aimed to be able to tightly fill in the spaces and all of these irregularities. You may also need to know here that there are also some Heat Exchanger Gaskets that require some sort of a sealant direct on them, so that they can function and work aptly.

The piping Heat Exchange Gaskets are made entirely of metal and heavily rely on the surfaces of seating as to be able to accomplish the seal. There is also significant utilization of the spring characteristics of the metal (yield strength of the material). It is quite typical of many types of ring joints or other similar systems of metal gaskets. These joints are commonly referred to as E-con or R-con compressive type system of joints.

When it comes to Fresh Water Distillers or Heat Exchange Gaskets, SONDEX is a primary company, based in Denmark and providing top notch industrial services in South East Asia and other regions. They have been leading the industry since 1984.